Contact Us


Mob:+86-18568225246, +86-18837303882

E-mail:realtop01@aliyun.com, realtop02@aliyun.com

Add: 552#, Honliv Road, Muye District, Xinxiang City, Henan, China

Home > News > Content
Scrap Plastic Pyrolysis Machine Cracked Into Small Molecules Oct 23, 2017

 scrap plastic pyrolysis machine Cracked into small molecules

Pyrolysis refers to the technology of the material in the absence of oxygen or anoxic conditions, the heat to split the macromolecules into small molecules until it becomes gas, so as to obtain combustible gases and bio-oil technology. Is an important way of biomass utilization, but also the current hot research at home and abroad scholars. Since pyrolysis is carried out under conditions of anaerobic or anoxic conditions, the technique has been widely used in the treatment of solid waste. The effects of the volatilization of the material, the heating method and the effect of pyrolysis temperature on the gas production characteristics were analyzed by means of thermal pyrolysis furnace. The pyrolysis conditions were investigated by means of pyrolysis, and the effects of pyrolysis temperature on pyrolysis time, pyrolysis gas yield and pyrolysis gas calorific value were analyzed. The effects of moisture on the pyrolysis of municipal solid waste Characteristics of the impact, and put forward 2 effective solution.

  The addition of catalyst to the material not only reduces the pyrolysis temperature of the material, but also changes the distribution of pyrolysis products and improves the product quality. Researchers have applied catalytic pyrolysis technology to biomass treatment and have been used in the disposal of domestic waste. Pyrolysis temperature and the effect of catalyst on the pyrolysis gas generation characteristics, and the kinetic characteristics of pyrolysis gas were analyzed, which provided the theoretical basis for the determination of pyrolysis equipment parameters of kitchen waste. Waste plastic refinery equipment! Is waste plastic refineries reliable? Waste plastic oil refining equipment will be the process of refining the waste generated how to deal with? What are the characteristics of waste plastic refinery equipment? Phase we buy a device is to want to create benefits for the enterprise, who do not want to do the loss of trading! So, on the waste plastic refinery equipment, some of the questions, the following technical staff to answer for everyone!

1 waste plastic refinery reliable: In fact, North industrial machinery and equipment manufacturers for the production of waste plastics for refining has been very mature. Waste plastic is an oil in the olefin as raw materials by the polymerization reaction, and waste plastic oil refining equipment is the country to its catalytic cracking method, the waste plastic cracking into a small molecule. These small molecules 5H12 ~ C11H24 is the composition of gasoline, C12H26 ~ C20H42 for the diesel component. Refining equipment through the decomposition of its decomposition of the oil in the oil component, the image of waste plastic oil refining is "where to come back from where to go."

2 how to deal with waste: waste plastic oil refining equipment will produce all the waste gas produced during the refining process, these waste gas in three parts: First, the feed inlet leakage of a small amount of water vapor and a small amount of oil and gas recovery by the hood After the second combustion into the dust treatment, and second, when the coal dust from the fan to the dust collector to deal with the chimney discharge to ensure that dust emissions to GB13271.-2001 related standards. Third, the reactor out of C4 below the normal temperature, atmospheric pressure can not be recycled gas (content is methane, ethane, butane, hydrogen, etc.) by the firewheel from the pipeline into the furnace by the gas gun burning, both energy saving and environmental protection. In the production process, the equipment is fully sealed state of operation, without any smell. Put an end to the plastic refining process of environmental pollution, to meet the needs of environmental protection.

3 waste plastic oil refining equipment, process characteristics: no waste plastic to the sediment, water, wire and other impurities, directly into the atmospheric furnace, heating distillate oil steam, cold suspected mixed oil, and then fractionated by fractionator Gasoline components and diesel components, the precipitation filter treatment, as a qualified fuel oil, waste plastic oil refining equipment, the oil rate of up to 60%, waste rubber oil refining rate of up to 40% or more.